Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Your Search: "yakima"

$29.00
There's no need to worry if you're using Yakima's HitchLock. The HitchLock allows you to lock your Yakima hitch carrier directly to your hitch receiver, preventing theft.
$30.00 - $50.00
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
$59.99
Yakima's Bolt Toploader Brackets are permanently mounted brackets that allow Yakima 1A Raingutter Towers or Q Towers to be used in some situations where your car doesn't have rain gutters (towers sold separately).
$7.70
Rubber straps used to secure bikes to Yakima hitch and strap racks manufactured prior to 2004. Each strap has 5 holes which are 3/4" in diameter. Since 2004 we have used rubber straps called Chain Straps, which each have 8 holes that are 1/2" in diameter.
$269.00
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes.
$49.00
Yakima's TubeTop solves the dilemma of how to carry bikes that have frames with non-traditional top tubes, such as certain suspension bikes, women's frames, children's bikes and more. The fully adjustable TubeTop is attached to the bike to act as a frame top tube so the bike will mount on all Yakima rear racks. Plus, the TubeTop's large molded collars are gentle on stems and seatposts. This Item may be in stock with Black accents or with Red, but both use the same part numbers. Please contact us to confirm the color of product in stock.
$589.00 - $649.00
Long, narrow and sleek, Yakima's SkyBox 21 safely totes your gear. It sports a rugged and spacious design and a smooth, aerodynamic profile. Plus, with no-assembly, rapid-fire mounting hardware and dual-sided, spring-loaded openings, it's easy to get this box on and off, and opened and closed. The universal mounting hardware fits round and square crossbars, plus many factory racks, too. - Dimensions: 92 x 36 x 18 inches - Capacity: 21 cubic feet - Yakima SKS locks included - Weight: 62 pounds
$229.00
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 15.40 lbs - Dimensions: L 37.00in x W 1.50in x H 3.50in
$239.00
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 17.80 lbs - Dimensions: L 44.00in x W 1.50in x H 3.50in
$269.00
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 20.80 lbs - Dimensions: L 73.00in x W 1.50in x H 3.50in
$69.00
LightenUp your path-and easily secure your light bar or a pair of spotlights on your LockNLoad platform rack and Yakima T-slot crossbars. Configurable in 16 different orientations, this bracket provides peace of mind when you head out on nighttime adventures. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Configurable in 16 different arm-mounting orientations. - Supports up to an 18-lb. light bar or a pair of 9-lb. spotlights. - Max light bar length 52" long, max light bar depth 5.25" (including heat sink). - Heavy-duty steel construction, with a durable black-zinc coating. - Fits LockNLoad platform rack and perimeter rails, Yakima JetStream, FlushBar, RailBar, HD Bar T-slots, and most other T-slot equipped platforms and crossbars. - Also accommodates light bars that don't secure from the ends. - Holds lights with 6/8/10 mm hardware, using included torx head hardware for enhanced security. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Specs: - Weight: 1.00 lbs - Dimensions: L 7.25in x W 2.00in x H 2.00in - Some assembly required, 30 minute install
$259.00
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 22.90 lbs - Dimensions: L 65.00in x W 1.50in x H 3.50in
$279.00
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 23.70 lbs - Dimensions: L 73.00in x W 1.50in x H 3.50in
$79.00
Load up and secure bulky gear with this set of heavy-duty adjustable brackets for the LockNLoad platform rack. Designed to hold just about any hard-shelled container-including coolers, storage bins, or even a toolbox—these brackets provide peace of mind for carrying gear on any rugged adventure. The drop-in style T-slot eyebolts make them easy to install and adjust, and they pair well with Yakima Heavy-Duty Straps or other tie downs (sold separately). Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Secures hard-shelled containers up to 3' tall and 110 lbs./50 kg. - Heavy-duty stamped-steel construction, with a durable black-zinc coating. - Easily installs in minutes on the LockNLoad platform rack and most other T-slot equipped platforms. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Packaged as a set of 4 brackets, easily pairs with our Heavy-Duty Tie Down Straps (sold separately). Product Specs: - Weight: 5.00 lbs - Dimensions: L 4.50in x W 4.00in x H 3.75in - Some assembly required, 15 minute install
$150.00
This low-profile custom-install solution delivers up to a 220-lb. load capacity. It's a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent. Product Details: - Permanent installation into the roof ditch for up to a 220-lb. load rating. - Designed for use with our SkyLine towers paired with any Yakima crossbar. - Yakima's patented Landing Pad design for quick and easy tower installation and removal. - Includes snap-on covers for when the rack is removed. - Choice of two pad shapes lets you create the perfect fit. - Stainless steel rivets for superior strength. - Includes four Landing Pads and necessary hardware (see instructions for required list of tools) - Vehicle must have compatible roof ditch for proper instillation (see instructions for fit parameters) - Some assembly required,10 minute install Product Specs: - Weight: 2.57 lbs - Dimensions: L 7.00in x W 2.00in x H 1.50in
$549.00
Ready to go when the fish are biting, the TopWater is a purpose-built, enclosed fishing rod box—keeping you prepared to hit the water with up to 8 fishing rods, up to 8 feet long, fully rigged, organized, and out of the vehicle. From spin to bait casting to fly rods, the protective foam pads and retention straps keep rods and reels safely suspended in place without getting banged around or entangled. The space below your rods makes room for low-profile tackle boxes or other wet gear. Made in the USA, this strong and rugged fishing rod box locks your gear with an included Yakima SKS (Single Key System) lock. For added ease, the universal attachment secures the TopWater to nearly any roof rack or Yakima's EasyRider and RACKandROLL trailers. Product Details: - Carry up to 8 fully rigged-up fishing rods of any style, up to 8 ft. long. - Side opening for easy access to rigged-up fishing rods. - Keeps wet rods out of the vehicle, organized, and set up for the day. - Space below the rods is perfect for low-profile tackle boxes and other gear. - Protective foam pads-designed with individual rod slots. - Rubber retention straps secure rods in place. - Small drain holes help prevent water from pooling in bottom of the box. - Built-in rod shields protect rod tips from damage. - Removable rod holders for 4 season transport of skis and other long gear. - Made in the USA with a sleek, aerodynamic Carbonite-textured lid. - Universal mounting hardware fits all Yakima crossbars and most other roof racks. - Add the SmarT-Slot Kit 5 to attach to a T-slot crossbar for an even sleeker profile (sold separately). - The included Yakima SKS (Single Key System) lock secures rods inside TopWater and locks TopWater to roof rack. - Made in the USA. Product Specs: - Weight: 31.10 lbs - Dimensions: L 102.00in x W 18.00in x H 9.00in
$149.00
Yakima Tracks offer easy connectivity and a low profile when towers are removed. Combine Yakima Tracks with Control Towers plus a set of Landing Pads and you have a versatile, adjustable base for your rooftop car rack system. - Compatible with either SkyLine Towers or Control Towers and Landing Pad 1 - PlusNut hardware included to install your rooftop car rack system directly to a vehicle roof - PlusNuts for installation on sheet metal - For custom fit info, contact your local Yakima dealer or give us a call - Limited Lifetime Warranty
$12.00
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
$90.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key
$499.00
Get your hands on Yakima's FullTilt 5, a premium tilt-down hitch rack that comes fully assembled out of the box. Installation is a breeze with the AutoPin and locking SpeedKnob. ZipStrips make loading and securing bikes simple. Need access to the rear of your vehicle? Just tilt the rack down with the conveniently located UpperHand lever. •Comes fully assembled with no bits and pieces. •AutoPin automatically positions and secures the rack into the hitch receiver •UpperHand lever tilts rack down for vehicle access and folds it flat for easy storage. •ZipStrips secure bikes to the rack and are fully removable (there are a few extras for the glove compartment). •Tool-free SpeedKnob quickly tightens and locks the rack to your car. •Fully padded arms for the ultimate in bike protection. •Unique 3D mast design with glossy black finish. •Anti-sway cradles eliminate bike-to-bike contact. •Integrated security system; locks bike to rack and rack to vehicle with included Same Key System Locks (SKS). •Enjoy a cold one with the Yakima signature bottle opener. •Optional TubeTop allows you to carry a variety of bike frames. •Fits 1.25" and 2" hitch receiver. •Carries up to 5 bikes.
$50.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
$70.00
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
$65.00
12 x 100mm fork adapter for use with 9mm fork-mount bike racks. - 12mm x 100mm - Axle not included. Works with your bike's thru-axle - Built-in safety tabs - Durable black powder-coat finish - All Yakima thru-axle ForkAdapters are compatible with Yakima ForkLift, SprocketRocket, Viper, Boa, SteelHead, CopperHead, SideWinder, BikerBar, BedHead and many other 9mm fork mounts Product Specs: - Weight: 0.41 lbs. - Dimensions: L 4.50 in x W 1.25 in x H 4.00 in - Limited Lifetime Warranty
$15.00
Use these adapters to attach the LockNLoad platform directly to the Yakima TimberLine and SkyLine towers. They eliminate the need for a traditional crossbar, and put the platform lower and closer to the roof-giving your rig a clean, customized look. One pair of LockNLoad SL Adapters required for each pair of towers. Check your vehicle fit to verify requirements Product Details: - Sold as a set of 2 adapters with included hardware to attach to 2 Yakima TimberLine or SkyLine towers (towers sold separately). - Structural steel brackets with powder-coat finish for durability and resistance to the elements. - The LockNLoad platform requires 2 or 3 sets of adapters (check your vehicle's and platform's fit requirements for number of adapters needed). - Only compatible with Yakima SkyLine and TimberLine towers. - Each set of adapters adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of adapters and towers. Never exceed the Yakima-specified weight limit for your vehicle. Product Specs: - Weight: 0.50 lbs - Some assembly required, 60 minute install
$19.00
For those riding with old-school RoundBars, this simple kit holds our Fishing Kayak Saddles tight so they don't rotate out of position. - Prevents our BigCatch saddles from rotating on our RoundBars - For use with Yakima RoundBar ONLY - Weight: 0.75 lbs
$50.00
Use these clamps to attach the LockNLoad platform to an existing Yakima roof rack, factory rack, or other aftermarket roof-rack system. One pair of clamps is required for each crossbar. Check your vehicle fit to verify requirements. Product Details: - Sold as a set of 2 clamps, with included hardware to attach to a single crossbar. - The LockNLoad platform requires 2 or 3 sets of Crossbar Clamps (check your vehicle's and platform's fit requirements for the number of crossbar clamps needed). - Welded steel construction for strength. - Rubber pads protect crossbar finish. - Compatible with all Yakima crossbars, along with many other aftermarket crossbars, factory crossbars, and 2" round or square tubing. - Each set of crossbar clamps adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of crossbar clamps. Never exceed the Yakima- or manufacturer-specified weight limit for your vehicle. Product Specs: - Weight: 1.86 lbs - Dimensions: L 2.75in x W 1.80in x H 1.00in - Some assembly required, 15 minute install
$10.00
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
$429.00
For the couple that loves to bike together, there's the SideWinder. Featuring a swing-out arm allowing one person to load a tandem bike with ease. Fork-mount style that won't interfere with most hatchbacks. Fits Yakima round or square crossbars only. - Swing-out arm allows one person to easily load a bicycle built for two - Simple, tool-free installation - Won't interfere with most hatchbacks - Padded cradle and quick-release straps protect bottom-mounted cables - Fits Yakima round or square crossbars - SKS Locks sold separately - One tandem bicycle up to 50 lbs at min of 24" crossbar spread Product Specs: - Weight: 18.50 lbs. - Dimensions: L 56.00 in x W 8.00 in x H 12.00 in - Minimum Crossbar Spread 24.00in - Maximum Crossbar Spread 36.00in - Limited Lifetime Warranty
$349.00
The LoadWarrior is the perfect accessory to boost the carrying capacity of your Yakima roof rack, plus it fits many other racks, too. Ingeniously, bike mounts attach directly to the basket to make carrying bikes easy, too. This cargo carrier is big enough to handle all your gear. The LoadWarrior even comes with a custom fairing that cuts wind drag and noise.
$25.00
Add the SmarT-Slot Kit 5 to the TopWater box for an even sleeker profile on T-Slot Crossbars. This easy hardware kit replaces the standard mounting hardware, and directly attaches into a T-slot channel on your crossbars. It works with all Yakima T-slot crossbars as well as most other T-slot crossbars. Product Details: - T-slot hardware kit for the TopWater rooftop fishing rod box. - Includes T-slot hardware, covers, and an install tool. - Compatible with all Yakima T-slot crossbars and most other T-slot crossbars. Product Specs: - Weight: 0.12 lbs - Dimensions: L 0.75in x W 0.75in x H 1.60in
$49.00
Go sleek with this low-profile t-slot awning bracket and mount up your awning with more options. This hardware kit replaces the standard mounting hardware of your awning and gives you multiple height settings to help you dial in your preferred look, including a rear deploy option. Product Details - ?Configurable in multiple height settings to allow a custom position on your vehicle. - T-slot design for easy attachment to Yakima HD Bar, JetStream, LockNLoad Platform and other standard t-slot crossbars - Rear deploy compatible with SlimShady 4.5 on a LockNLoad platform or HD Bar - Heavy-duty steel construction with durable, powder-coated finish - Compatible with all Yakima SlimShady awnings Product Specs - Weight: 3.78 lbs. - Dimensions: L 5.75 in x W 3.25 in x H 4.65 in
$79.00
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
$349.00
The latest addition to our popular Warrior Cargo Basket collection takes up less roof space, giving you more room to add bikes, boats, boards, or even a SkyRise rooftop tent. A true Yakima Warrior, the new SkinnyWarrior is built from rugged, weather-resistant steel. It includes a fairing to reduce drag and wind noise. This is a sleek, load-and-go option for a multisport rooftop system. Use the SkinnyWarrior to haul coolers, firewood or golf clubs. To wrangle even more gear, add the optional Skinny Warrior extension. Product Details: - Weather-resistant, heavy-duty steel construction for years of rugged use - Narrow profile leaves room on bars for bikes, boats, boards or a SkyRise rooftop tent - Easy to mount and remove, no tools required - Universal mounting hardware fits our StreamLine, Round Bars and HD Bars along with most other crossbars - Custom fairing included for reduced drag and wind noise - SkinnyWarrior Extension available for 16" of additional space Product Specs: - Weight: 23.13 lbs - Dimensions: L 58.00in x W 23.00in x H 6.50in - Some assembly required, 10 minute install
$319.00
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
$19.00
The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered. Product Details: - Hanging storage hooks for the SkyRise tent keep your camping gear organized - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities - Yakima carbine attachment hook is secure, strong, and easy to use - Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear - Sold as a pack of four Product Specs: - Weight: 0.48 lbs - Dimensions: L 6.00" x W 1.60" x H 0.50"
$269.00
The SideBar heavy-duty side rails increase the utility of our OverHaul HD and OutPost HD truck rack systems with more carrying space. Available in two size options and a telescoping design, it’s always a perfect fit. The full-length T-slot and 100-lb. capacity make it easy to attach more accessories and gear. Now you can customize your Yakima truck rack system to securely handle a wider range of outdoor fun. - Fully adjustable, heavy-duty side rails attach to OverHaul HD and OutPost HD truck racks - Customizes the OverHaul HD and OutPost HD truck racks by expanding gear-carrying capacity - Engineered aluminum construction delivers serious strength without weighing things down - Holds up to 100 lbs. of gear and accessories—great for heavy items like fuel and water - Integrated T-slot makes it easy to attach and remove Yakima truck accessories - Adjustable from 60-84" - Sold in sets of two - Weight: 13.46 lbs - Dimensions: L 62.75in x W 2.37in x H 4.75in - Some assembly required, 10 minute install
$219.00
The ForkLift is one of Yakima's most versatile fork-mounted roof racks. It boasts square, round and direct-to-factory crossbar capability right out of the box. It also features quick and easy tool-free installation, a sleek design and a smooth, automotive finish that looks great on any car. The easy-to-adjust sliding wheel tray makes positioning the rear wheel a snap and it’s compatible with most disc brakes.
$39.00
The SideKick shoe bag keeps muddy, stinky footwear hanging outside the SkyRise tent, but within reach for a quick grab-and-go. Designed to hold a pair of large hiking boots or a few pair of lighter shoes, the bag slides into the SideTrack on the outside edge of the SkyRise floor for easy access from inside or outside the tent. Extra pockets organize and store small items like flashlights, smartphones, and smelly socks. Plus, it's made from durable, waterproof 500D material and has a hook-and-loop closure lid to protect your shoes from the elements. Product Details: - Hanging storage bag keeps dirty shoes outside the SkyRise tent where they belong - Slides into the SkyRise SideTrack for quick and easy attachment to the outside edge of the tent floor - Designed to keep shoes and socks within reach from inside and outside the tent so you can easily lace back up and go - Accessory pockets inside and out hold stinky socks and small essentials - Durable, waterproof 500D tarpaulin material protects contents from wet weather - Lid seals with hook and loop closure to shut out the elements - Measures 11” x 15” x 7” and can handle a big pair of hiking boots or a couple pair of shoes Product Specs: - Weight: 0.75 lbs - Dimensions: L 15.00" x W 11.00" x H 7.00"
$169.00
Simple and compact, the ReelDeal fishing rod mount securely carries up to 8 full-length fishing rods of just about any style on your roof rack—instead of in your vehicle. It's the safe, easy way to transport your rods fully rigged-up and ready to fish. The single-button side access makes for quick loading/unloading and the included SKS (Same Key System) locks keep your rods safe and secure. Product Details: - Carries up to 8 fully rigged-up fishing rods of just about any style. - 15.5" of full-length padding securely holds and protects rods. - Tool-free clamp design makes install and removal a breeze. - Universal mounting hardware fits all Yakima crossbars and most other roof racks. - Integrated SKS (Same Key System) locks included for added security. - ReelDeal also can transport up to 2 snowboards and/or 4 pairs of skis. Product Specs: - Weight: 6.50 lbs - Dimensions: L 22.00in x W 6.00in x H 6.50in
$219.00
The SideBar heavy duty side rails increase the utility of our OverHaul HD and OutPost HD truck rack systems with more carrying space. Available in two size options and a telescoping design, it’s always a perfect fit. The full-length T-slot and 100-lb. capacity make it easy to attach more accessories and gear. Now you can customize your Yakima truck rack system to securely handle a wider range of outdoor fun. - Fully adjustable, heavy-duty side rails attach to OverHaul HD and OutPost HD truck racks - Customizes the OverHaul HD and OutPost HD truck racks by expanding gear-carrying capacity - Engineered aluminum construction delivers serious strength without weighing things down - Holds up to 100 lbs. of gear and accessories—great for heavy items like fuel and water - Integrated T-slot makes it easy to attach and remove Yakima truck accessories - Adjustable from 36-64" - Available in short-bed and long-bed lengths - Sold in sets of two - Weight: 9.46 lbs - Dimensions: L 38.75in x W 2.37in x H 4.75in - Some assembly required, 10 minute install
$29.00
A camping necessity, the SkyLoft holds the small, important stuff you always need, keeping them off the floor and right in reach. Clip it inside your SkyRise tent for easy access to headlamps, smartphones, and late night snacks. When you wake up, take it outside with you and slide it into the SideTrack on your SkyRise to stow jackets, towels, and toys. The mesh material allows you to see your stuff, and the generous 40" x 17" dimensions provide plenty of room. Two zippered pockets give you even more storage options, you can even use one of them to store the SkyLoft when it's time to break camp. Product Details: - Hanging storage net for the SkyRise tent helps keep your camping gear organized - Clips inside your SkyRise’s roof with adjustable straps so your late night essentials are easy to find and out of the way - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to stow daytime necessities, like cooking supplies and treats for Fido - See-through mesh material makes it easy to find what you’re looking for - Two zippered pockets add security and organization and, one doubles as a storage pouch for your SkyLoft when not in use - Measures a generous 40” x 17” to handle enough gear for two or three Product Specs: - Weight: 0.65 lbs - Dimensions: L 40.00" x W 17.00" x H 0.50"
$999.00
Perfect for tour operators, group rides and big families. Constructed of heavy-duty steel, our first-ever vertical bike rack safely hauls up to six mountain bikes to the trailhead. We designed and tested it in the lab and on the road to meet our demanding Yakima standards. The easy-to-operate tilt mechanism with two adjustable mast angles keep your bikes from bumping into your car, truck or SUV and makes accessing the tailgate a breeze. The HangOver’s vertical orientation carries more bikes in less space. Get ready to session! Product Details: - Transports up to 6 bikes using minimal space 37.5 lbs max per bike - Foot-operated tilt mechanism changes rack position for easy loading and unloading - Tilts down and out of the way for easy rear-of-vehicle access - Securely supports bikes by the fork crown - Fits suspension-fork bikes only - Fits fat bike suspension forks - Soft padding protects the fork’s finish - Rotating wheel cup accommodates bikes with various wheelbases - 2 mast height positions for improved ground clearance and ease of loading - 2 mast angles to avoid bike-tire contact with your vehicle - HitchLock included - Built-in bottle opener, cheers! - Fits 2" hitch receivers only - Add your own bike lock to the integrated lock loop for greater bike security Product Specs: - Weight: 73.00 lbs - Dimensions: L 22.00in x W 69.50in x H 60.00in - Some assembly required, 10 minute install - 2" hitch receiver required
$29.00
Why let loading and unloading take a toll on your gear and rack systems? Our new, extra-thick Wear Strip is a raised rubber strip designed to protect equipment and T-slot crossbars. Sold in trim-to-fit pairs, the Wear Strips install easily and help keep out debris. Product Details: - Durable rubber strip protects gear and crossbars from the wear-and-tear of loading - 76" length can be easily trimmed to fit any bar width - Compatible with Yakima HD Bar and JetStream Crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 76.00in x W 1.12in x H 0.33in - Fully assembled
$499.00
Here's a hitch rack that goes long on features. Starring the UpperHand control lever that tilts the rack to make access to your vehicle a cinch. Also includes zero-hassle ZipStrips to secure your bike, folds flat for easy storage and to top it off is fully assembled out of the box. - No garage required. Comes fully assembled with no bits and pieces. - New UpperHand lever tilts rack down for vehicle access and folds it flat for storage. - New ZipStrips secure bikes to the rack and are fully removable. - Tool-free SpeedKnob quickly tightens and lock the rack to your car. - Anti-sway cradles eliminate bike-to-bike contact. - Enjoy a cold one with the Yakima signature bottle opener. - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Fits 1.25" and 2" hitch receiver. - Carries up to 5 bikes. Also available in a 2 or 4 bike capacity. - Lock your bikes to the rack with the HandCuff locking cable (sold separately). Product Specs: - Weight: 35.60 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty
$29.00
Our versatile new Eye Bolts integrate seamlessly with our Truck Collection HD Bars, and most T-slot crossbars, to create instant tie-down points for securing gear. Made Yakima-smart, they’re secure, strong and easy to install—just drop them into the slot and twist into place. Product Details: - Rugged steel construction with durable black corrosion resistant finish for many years of use - Includes hardware for both HD Bar and standard T-slot crossbars - Handles up to 250 lbs. on our HD Bars, and up to 165 lbs. on Yakima JetStream, FlushBar and RailBar crossbars - Set of two Product Specs: - Weight: 0.50 lbs - Dimensions: L 1.75in x W 0.75in x H 2.12in
$699.00
Like the perfect cast, the deluxe DoubleHaul rooftop fly rod carrier gets you to that special spot on the water at dawn or that early evening hatch. You're there and ready with the perfect set-up- up to 4 fully strung-up rods up to 10 ft. long. Rain or shine, your rods are securely locked and protected from the elements. The reel box is designed to protect and fit most reel sizes, with space to carry up to 2 spey rods. To make things even easier, the DoubleHaul mounts to most roof racks with a simple, tool-free universal crossbar attachment. With modern styling and an optional half-length configuration, it's a perfect fit on any size vehicle. Be ready to hit the water when the fish are biting. Product Details: - Customizable rooftop fly rod carrier, configurable at either 11 ft. or 6 ft. of length. - Transports 4 fully strung-up fly rods up to 10 ft. long. - The top 2 reel slots fit most 12-wt. reels and the bottom 2 reel slots fit most 10-wt. reels. - Reel box holds common fighting butts of single-handed rods. - Reel box holds up to 2 spey rods in upper slots. - Four individual plastic-lined aluminum rod tubes provide strength and separation for rods while helping prevent abrasion. - Side placement of reels reduces wear on rod-stripping guides and eyelets. - Custom-fitted felt padding for premium reel protection. - Universal mounting hardware fits all Yakima crossbars and most other roof racks. - Add the SmarT-Slot Kit 3 to attach to a T-slot crossbar for an even sleeker profile (sold separately). - Included Yakima SKS (Single Key System) locks secure rods inside DoubleHaul and lock DoubleHaul to roof rack. Product Specs: - Weight: 46.60 lbs - Dimensions: L 131.00in x W 14.00in x H 9.00in
$79.00
Get your blades out of the backseat and up on top where they belong. Easy to use and super secure, the TopGrip is a smarter way to carry your paddle and other gear. Attach it to any Yakima crossbar or our ShowDown mount and secure your paddle in the padded clamps. Voila! Your wet paddle is out of the inside of your car, riding safely, securely, and away from the dangers of slamming doors and clumsy passengers. Not a paddler? Use the TopGrip for axes, shovels, or other long items. Product Details: - A convenient and secure way to transport a paddle, axe or shovel on the roof rack - The double padded cradles close over any shaft 30-50mm in diameter - Fully lockable with the addition of 2 SKS locks (sold separately) - Includes hardware for t-slot attachment (for JetStream, FlushBar, RailBar), and MightyMounts for CoreBar and RoundBar - Also attaches to ShowDown to load and carry your paddle next to your boat - Sold as a pair of cradles to carry one paddle, axe or shovel, up to 9 lbs. - Simple, secure roof rack mount carries one paddle, axe or shovel up and out of the way - Double-padded clamps deliver a super tight hold without damaging your paddle shaft - Fits just about any paddle or other straight handled item from 30mm to 50mm in diameter - Carries items up to 9 lbs in weight - Easily attaches to Yakima JetStream, CoreBar, and RoundBar as well as most other t-slot crossbars - Mounts directly to ShowDown kayak/board mount - Add SKS (Same Key System) locks for added security (sold separately) - Sold as a pair to carry one paddle, axe, shovel or other long item - No assembly required - 5 minute install Product Specs: - Weight: 1.18 lbs - Dimensions: L 4.25" x W 2.00" x H 3.25"
$63.00
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
$169.00
With more than a quarter century of real-world testing, Yakima's iconic round bar is proven across a range of adventures and under a variety of loads. Strong, utilitarian and easy to use—this classic is a classic for a reason.
$399.00
Here's a hitch rack that goes long on features. Starring the UpperHand control lever that tilts the rack to make access to your vehicle a cinch. Also includes zero-hassle ZipStrips to secure your bike, folds flat for easy storage and to top it off is fully assembled out of the box. - No garage required. Comes fully assembled with no bits and pieces. - New UpperHand lever tilts rack down for vehicle access and folds it flat for storage. - New ZipStrips secure bikes to the rack and are fully removable. - Tool-free SpeedKnob quickly tightens and lock the rack to your car. - Anti-sway cradles eliminate bike-to-bike contact. - Enjoy a cold one with the Yakima signature bottle opener. - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Fits 1.25" and 2" hitch receiver. - Carries up to 2 bikes. Also available in a 4 or 5 bike capacity. - Lock your bikes to the rack with the HandCuff locking cable (sold separately). Product Specs: - Weight: 32.00 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty
$469.00
Here's a hitch rack that goes long on features. Starring the UpperHand control lever that tilts the rack to make access to your vehicle a cinch. Also includes zero-hassle ZipStrips to secure your bike, folds flat for easy storage and to top it off is fully assembled out of the box. - No garage required. Comes fully assembled with no bits and pieces. - New UpperHand lever tilts rack down for vehicle access and folds it flat for storage. - New ZipStrips secure bikes to the rack and are fully removable. - Tool-free SpeedKnob quickly tightens and lock the rack to your car. - Anti-sway cradles eliminate bike-to-bike contact. - Enjoy a cold one with the Yakima signature bottle opener. - Available TubeTop (sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. - Fits 1.25" and 2" hitch receiver. - Carries up to 4 bikes. Also available in a 2 or 5 bike capacity. - Lock your bikes to the rack with the HandCuff locking cable (sold separately). Product Specs: - Weight: 35.00 lbs. - Dimensions: L 44.00 in x W 12.00 in x H 16.00 in - Limited Lifetime Warranty
$249.00
Friends will double-take when they see our most versatile, aerodynamic bike mount on your car. It carries your complete bike—no wheel removal needed. The universal mounting system fits nearly any crossbars you can think of. - Fits Yakima round, square, factory or aerodynamic crossbars - Zero contact with frame; carbon fiber and custom paint jobs are protected - Accommodates disc brakes, thru axles, and full suspension bikes - Holds bike upright while you secure the bike to the mount - Leave your front wheel on for easy loading (some fenders may need to be removed to transport bike) - No tools or assembly required - Fits 20" to 27.5" wheels with tire widths up to 3" and 29" wheels with tires widths up to 2.7" - SKS Locks sold separately - 1 bike, up to 40 lbs at min of 18" crossbar spread; or up to 30 lbs at min of 16" crossbar spread - Accommodates bike wheelbases up to 48" Product Specs: - Weight: 13.00 lbs. - Dimensions: L 56.00 in x W 7.00 in x H 7.50 in - Minimum Crossbar Spread 16.00in - Maximum Crossbar Spread 42.00in - Limited Lifetime Warranty
$39.00
For tried-and-true security, our new HD Hook Straps deliver maximum strength with a proven hook attachment to easily hold larger cargo in place. Designed to work with Yakima EyeBolts and integrated attachment points on our OverHaul HD, OutPost HD and HD Bar, they also work great with other tie-down points. These straps are quick and easy to adjust—load and go! - Our proven Heavy-Duty Straps with durable, vinyl-coated hooks - Easily attach to our EyeBolts, or other tie-down points, for a secure hold - 10-ft. length handles a wide range of gear and supplies - Set of two - Weight: 1.00 lbs - Some assembly required
$119.00
Longer trips or bigger groups? Extra firewood or another duffel? Use the SkinnyWarrior Extension to plug 28% more capacity into the SkinnyWarrior cargo basket so it can carry more gear. Easy to install, it’s built from solid steel for years (and countless adventures) of rugged use. - 16" extension increases cargo capacity by 28% - Made of the same weather-resistant steel as all Yakima Warriors - Plug-in design seamlessly integrates with the SkinnyWarrior basket - Weight: 4.60 lbs - Dimensions: L 16.00in x W 23.00in x H 6.50in - Some assembly required, 5 minute install
$399.00
Transport 2 bikes regardless of frame design, suspension or wheel size. Perfect for fat bikes, bikes with fenders and women's-specific bikes. - Transport two bikes regardless of frame design, suspension, or wheel size - Ideal for fat bikes, kids' bikes and fenders (FatStraps—sold separately—are necessary for carrying fat bikes) - Secures bike by the frame with padded arms - Fits 1-1/4" or a 2" hitch receiver right out of the box - Low tray height for quick and easy loading and unloading of bikes - Folds down with bikes loaded for rear-of-vehicle access - Folds up when not in use - Accommodates bike wheelbases up to 48" - Maximum bike weight 45lbs/20.5 kg (Total maximum load 90lbs) Product Specs: - Weight: 39.00 lbs. - Dimensions: L 50.00 in x W 24.00 in x H 18.00 in - Limited Lifetime Warranty
$399.00
The LongHaul is a bike rack designed, built, and thoroughly tested to stand up to the long miles and rigorous demands of RV and travel-trailer use. Durable, stable and secure, the LongHaul carries four bikes with ease in the SuperCush ZipStrip cradles. The LongHaul is easy on and off, includes folding arms and a built-in bottle opener. Exceptional security is built in with a full SKS security package that locks your bikes to the rack and the rack to the vehicle. Holds up to four bikes. - RV Tested and Approved. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze. - Anti-sway cradle design holds bikes in place and minimizes bike-to-bike contact. - Included full SKS security package: HitchLock locks rack to RV and LockDown cable secures bikes to rack, all with a single key. - Arms fold down when rack is not in use for easy parking and storage. - 37.5lb weight maximum per bike. - Carries up to 4 bikes. - Available: TubeTop;(sold separately) is required for non-conventional, step-through, BMX, and kid's bikes as well as some full suspension bikes. Product Specs: - Weight: 32.00 lbs. - Dimensions: L 28.00 in x W 13.00 in x H 41.00 in - Limited Lifetime Warranty
$55.00
Make your base camp shine with the SunBelt light strip for your SkyRise tent. Mount it inside or outside your SkyRise, or just about anywhere around camp. The flexible LED strip has a fabric sleeve with adjustable straps for easy attachment. The SunBelt is bright but not glaring - perfect for finding your way without losing sight of the stars. The integrated 3 foot USB cable can be powered with any 5 volt USB power source (not included). Product Details: - Flexible LED light strip for your SkyRise rooftop tent provides illumination almost anywhere inside the tent or around your campsite - Versatile mounting straps stretch as far as 75” apart, giving you plenty of mounting possibilities - Slides into the SideTrack on the outer edge of the SkyRise floor for quick and easy attachment outside of the tent - Fabric construction protects the light strip from damage - Integrated 3 foot USB cable can be powered by any 5 volt USB power source (not included) Product Specs: - Weight: 0.25 lbs - Dimensions: L 32.00" x W 1.00" x H 0.50"
$649.00
DrTray is the ultimate tray rack for your hitch. It can easily handle road, mountain, and fat-tire bikes with up to 5” tires. Bike clearance is top notch, with 18” between the trays. To make it even better, the bike tray spacing can be adjusted tool-free while the bikes are loaded, virtually eliminating any issues with bike-to-bike interference. The ergonomic remote tilt lever is intuitive to use and allows quick access to the rear of the vehicle as well as a convenient carrying handle. Its locking SpeedKnob delivers simple and secure vehicle attachment, and exceptional bike theft protection is built in with a burly SKS cable lock system. Plus, DrTray is adaptable – add an EZ+1 to carry a third bike! - Weighs in at only 34 pounds– the lightest rack in its class. (2” receiver Model only) - Securely carries 26” to 29” wheels and tires up to 5” wide - Unrivaled spacing between bikes - up to 18” between each bike - Tool-free adjustment while bikes are loaded minimizes the potential for bike-to-bike interference - Easy-to-use remote tilt lever and lightweight, aluminum design makes raising and lowering the rack a breeze - Tool-free locking SpeedKnob for a secure and easy install to your vehicle - Extra burly SKS cable lock system for each bike secures both wheels and frame - Add the EZ+1 and carry a third bike (2” receiver model only, sold separately) TECHNICAL SPECS - Weight: 34.00 lbs - Dimensions: L 16.00” x W 54.00” x H 11.50”
$219.00
Bust out the big boats with the BigCatch’s whopping 150-lb. capacity. Introducing the first universal kayak saddle built to handle heavy fishing kayaks and sit-on-tops. The rubber-padded saddles conform to the kayak’s hull for a super-secure, full-contact carry that’s easy on your boat. A simple, tool-free install will load it up faster for even more time to chase the next big catch. If you have T-slot crossbars, don’t forget our SmarT-Slot Kit 4 (sold separately) for an even cleaner, more integrated look. Product Details: - Specially designed to support the extra weight of fishing and sit-on-top kayaks - Handles up to 150 lbs.—enough for the heaviest kayaks - Oversized cradle protects the boat and conforms to a variety of hull shapes - Soft rubber pads protect the kayak from dings and scratches - Felt pads for easy kayak loading - Universal mounting hardware fits our StreamLine, RoundBars and HD Bars—along with most other crossbars - Easy, tool-free installation to quickly mount, load and go - Heavy-Duty Straps and Bow and Stern Tie-Downs included - Available RoundBar Kit (sold separately) prevents BigCatch saddles from rotating on RoundBars - Available SmarT-Slot Kit 4 (sold separately) for use with T-slot crossbars Product Specs: - Weight: 8.40 lbs - Dimensions: L 6.25in x W 9.00in x H 5.00in - Base Rack System Required - 10 Minute Install - Tool-Free Install
$59.00 - $65.00
This fork adapter allows you to put your thru-axle fork on any 9mm fork-mounted bike rack. - Axle not included. Works with your bike's thru-axle - Fits all fork bike mounts including, Yakima, Thule, Rocky Mounts, etc. - Built-in safety tabs - Durable black powder-coat finish Product Specs: - Weight: 0.32 – 0.38 lbs. - Minimum Crossbar Spread 16in - Maximum Crossbar Spread 42in - Limited Lifetime Warranty
Page 1 of 2 Next page