The 12 x 100 mm thru-axle adapter allows modern road bikes to quickly secure to any traditional 9 mm fork mount bike tray. A simple thru-axle adapter that allows modern road bikes to quickly secure to any fork-mount bike rack. - 12mm x 100mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
This 15mm x 110 thru-axle adapter allows modern mountain bikers to quickly secure their bike on any traditional 9mm fork style bike mount. PRODUCT DETAILS - 15mm x 110mm - Axle is not included - Built in safety tabs - Durable black powder coat finish TECHNICAL SPECS - Weight: 0.70 lbs - Dimensions: L 4.50” x W 1.25” x H 4.00”
Hitch rack swing adapter. Now you can rack up the bikes and still access your tailgate. The BackSwing hitch adapter turns your hitch product into an easy-to-use swing-away rack that locks up tight while you're on the road. It works seamlessly with most 2" bike racks, like the HoldUp EVO - as well as almost any other rack using a 2" receiver - to let you swing your fully loaded rack out of the way so you can easily get to your coolers, gear, and Fido. Product Details: - Hitch extension converts most 2" hitch products to a swing-away rack - Provides easy tailgate access - even with a rack fully loaded with bikes - Easily swings open 90 degrees and locks in place with the simple to use release lever - Safety latch secures the rack closed while you're on the road - Secures to any 2" hitch receiver using a threaded pin - Included SKS (Same Key System) lock keeps the rack secure - 250 lb maximum load capacity (rack plus gear) Product Specs: - Weight: 35.46 lbs - Dimensions: L 20.00" x W 30.00" x H 8.00" Installation Details: - Some Assembly Required - 10 Minute Install - 2" Hitch Receiver Required Compatible with the following: - Dr.Tray- 2" only (without the EZ+1 attached) - SingleSpeed - HangOver 4 - 4 Bike only - TwoTimer - HoldUp EVO - HoldUp EVO +2 - HoldUp - HoldUp +2 - FourTimer - LongHaul (Vans and Passenger Vehicles Only) - RoadTrip (Vans and Passenger Vehicles Only)
Tailor your towers – these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima's BedHead offers an affordable, no-drill solution for carrying a bike by its fork in the bed of your truck. Durable and corrosion-resistant, the BedHead quickly installs onto the interior lip of your truck bed's rail as shown. A beefy, long-throw (so you don't have to unscrew it to install the bike) 9mm-diameter skewer holds your bike fast. Padding protects your truck’s finish, too.
Yakima's BikerBar is a complete tool-free bike carrying system for your pickup truck. It installs and removes easily with the included Yakima BedRock quick releases and comes with a round bar and two locking Boa bike mounts. Available in two sizes, it fits most common mid- and full-size trucks.
When you've got a tough racking dilemma, what you really need is Yakima's BlockHead. This handy device securely holds your bike by the fork with a rugged, 9mm-diameter skewer. The BlockHead is made of anodized aluminum and bolts to your pickup, RV or practically anywhere (use your imagination for hundreds of other bike-storage possibilities).
The Boa is a short-tray bike mount that fits a wider range of crossbar spreads (32 to 50 inches). It has a rotating wheel tray and a sleek fork block with Yakima's Locking Long-Throw Skewer, which clears most fork safety tabs.
Yakima's Chain Straps are replacement bike holding straps for various models of Yakima's trunk and hitch racks. The stretchy, sturdy rubber is easy on your bike's finish and is extremely durable for long life.
Yakima's CrossBars are a necessary component of your rack system. They attach to your towers and enable you to affix bike trays, ski carriers, rooftop boxes, etc. Strong and durable, they're made of vinyl coated steel and stand up to harsh weather.
Yakima's DeadLock protects you in two important ways: first, it locks the outside bike to the rack with a cable and steel pin so all your bikes are safe and secure. Second, it locks the hitch-mounted rack to the vehicle so the rack can't get stolen, either. Plus, there's a universal key so you can easily unlock your bikes and rack as needed.
- Expands the DrTray carrying capacity - Securely carries road bikes, mountain bikes, and up to 5" fat bikes - Quick and easy to put on and take off - SKS cable lock system secures both wheels and frame to help prevent theft - Elevated for added clearance between bikes - Max bike weight 40lbs - 11.5" spacing between bikes plus elevated - Weight 14lbs
- Fits all Yakima crossbars except 86-inch - Sold in sets of 4
Yakima's Fork Adapter allows you to attach your through-axle fork to your fork-mounted rack quickly and easily. The tall arms give your brake caliper room to clear the tray, too.
Yakima's FourTimer hauls 4 bikes of virtually any style, from children's bikes to big DH bikes to fat bikes. • Transport four bikes regardless of frame design, suspension or wheel size • Ideal for fat bikes, kids' bikes, and fenders • Secures bike by the frame with padded arms • Low tray height for quick and easy loading and unloading of bikes • Folds down with bikes loaded for rear-of-vehicle access. Folds up when not in use • Easily converts into 2-bike carrier
A fresher take on the classic strap rack, the Yakima FullBack 3 securely holds your bike, is simple to use, stores easily, installs easily, and is easy on the wallet. The construction is rugged, the modern design is as cool as your ride, a locking package deters bike theft, and there’s a built-in bottle opener. Cheers. - New SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Modern design delivers an improved fit and looks awesome - Bomber external frame holds tough, cushy padding protects your paint - Full SKS locking package secures rack to vehicle, bikes to rack to help prevent theft - Simple installation with an interlocking HUB that aligns key adjustment points - Four-strap attachment is intuitive and easy - Compact for easy storage - Premium high-gloss finish - Yakima signature bottle opener lets you enjoy a post-ride cold one - Easy number dial makes installation simple - Number of Bikes 3 TECHNICAL SPECS - Weight: 23.00 lbs - Dimensions: L 30.00” x W 25.00” x H 22.00”
The GateKeeper tailgate pad is a perfect companion for pick-up bed bike transport. The durable nylon exterior protects your bike from your truck’s tailgate while the soft felt backing keeps your truck’s paint protected. Integrated SitTight bike cradles add extra stability and protection for your bikes and the HindSight tuck-away cover opens up the view for your back-up camera, leaving you with a worry free shuttle to the top. - Tailgate pad for your truck that securely carries your bikes to the trailhead - NEW Cushioned SitTight cradles protect bikes from shifting and sliding - NEW HindSight cover tucks out of the way so your back-up camera can do its job - NEW Velcro cradle closure system is easy on carbon bike frames and painted surfaces - Rugged nylon outer material resists abrasion and weather damage - Extra soft felt backing protects your truck’s paint job - Integrated strap management system keeps the pad tight and secure on the way up the mountain - Medium size has a 5 bike capacity and fits mid-size & some older full-size trucks - Large size has a 6 bike capacity and fits most full-size trucks - Medium Dimensions: 53-inch Long x 5-inch Wide x 17-inch Tall - Large Dimensions: 62-inch Long x 7-inch Wide x 20-inch Tall
Body for HitchLock. Requires SKS lock core. (Sold Seperately)
Fast, secure, and easy to use, the HoldUp EVO is built to handle new bike standards, like fat tires and boost hubs, but it easily carries the classics too. The StrongArm hook secures the bikes at their wheels, protecting carbon frames and painted surfaces. Tilt the rack with bikes loaded for quick rear-of-vehicle access using the new easy to reach tilt lever and KickStart foot pedal. The super-simple locking SpeedKnob makes install a tool-free breeze and included SKS bike locks keep your mind at ease. - Hitch mounted tray rack that loads quickly and carries two bikes without frame contact - NEW Easy-access tilt mechanism and KickStart foot pedal make raising and lowering the rack a breeze, even with bikes loaded - NEW Tool-free locking SpeedKnob makes installation and removal fast, easy and secure - StrongArm hook secures bike at wheels, protecting painted surfaces and carbon frames - Easily adjust trays to reduce bike-to-bike interference - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes under 50 lbs. - Accommodates disc brakes, through axles, boost hubs, and full suspension bikes - Fits 20-inch to 29-inch wheel sizes and tires up to 5” wide - Integrated SKS (Same Key System) locks included for added bike security - Available in two sizes: 1.25-inch hitch receivers & 2-inch hitch receivers - Carry four bikes – just add the HoldUp EVO +2 (compatible with 2-inch version only)
Now you can haul 2 bikes of any size, from stout BMX bikes to long cruisers and heavy DH bikes with no need for adapters thanks to Yakima's HoldUp Hitch Rack. This sturdy rack sports heavy cast wheel trays and their adjustable StrongArm retainers that hold the bikes by the wheels for superior stability and super-quick loading. Side-to-side adjustability ensures a perfect fit and minimizes bike-to-bike interference. A user-friendly trigger folds the tray down for easy access and the entire mast folds up when not in use. Plus, the HoldUp also includes Yakima's LockDown cable system, which secures your bicycles and rack to your vehicle. There's even an integrated bottle opener.
Yakima's Locking BedHead keeps your bike locked and secure in your truck bed. This durable and corrosion-resistant mount quickly clamps (no drilling required) onto the interior lip of your truck bed's rail. The included SKS (Same Key System) cores and keys lock the bike and mount to the truck. A beefy, long-throw (so you don't need to unscrew it to clear fork safety tabs) 9-mm-diameter skewer holds your steed securely. And, padding protects your truck’s finish, too.
Yakima's vehicle-specific Q Clips are required to mount Yakima Q-Towers to your car. One end of the Q Clip attaches to the Tower and the other end attaches to your vehicle's door frame when you fasten your roof rack. Plus, they're coated to protect your vehicle's finish. Select the right model Q Clip for your vehicle using Yakima's rack configurator.
Load up your bikes in no time flat with Yakima's QuickBack rack. An integrated adjustment knob lets you effortlessly adjust arm angles to perfectly transport two bikes. And, with its labeled strap system, it's very easy to use. Yakima's Tri-Padded feet, coated metal buckles are very durable and maintain your vehicle’s pristine paint job. Your bikes are protected, too, as a result of Yakima's SwitchBlade anti-sway cradles that eliminate bike-to-bike contact. A steel-reinforced strap that goes into the trunk provides a little security, and the whole rack folds down when not in use via a single knob.
Yakima's RidgeBack 2 securely transports two bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
Yakima's RidgeBack 4 securely transports four bikes with Yakima's cradles and their simple-to-adjust, ratcheting ZipStrips. Constructed of lightweight aluminum, this innovative hitch rack comes fully assembled out of the box for ease of use. Just plug it into the hitch, tighten and lock the SpeedKnob, and you're ready to load up the bikes! In addition to carrying traditional double-diamond frames with zero bike-to-bike contact, the anti-sway cradles are specially shaped to be compatible with non-standard and full-suspension frames. Plus, the Upperhand control lever allows the rack to fold down, away from back of your vehicle, for unimpeded trunk/hatch access, or when not in use, lets the RidgeBack fold flat for storage.
These 12' locking multi-purpose cargo straps are a must-have accessory for anyone with a rack. Lock anything from surfboards and boats to bikes and motorcycles. Even strap and lockdown ladders and other gear. Youll wonder how you ever lived without them.
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 2 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 6 SKS Cores and matching keys - 2 keys included plus a control key
Make that spare tire work for a living – the SpareRide easily attaches to your rear-mounted spare and turns it into a bike rack. Durable, stable and secure, it installs easily. SuperCush cradles securely hold and protect your bikes, a bottle opener opens bottles, and integrated SKS locks bum out bike thieves. - SuperCush ZipStrip cradles secure the bikes and make loading and unloading a breeze - ZipStrips secure bikes to the rack and are fully removable - Anti-sway cradle design minimizes bike-to-bike contact - Fits nearly any stock size spare - SKS locking package secures bikes to rack to help prevent theft - TireTread pads add stability and protection - Steel construction is strong and durable - Universal mounting plate with extension fits most lug patterns - Locking knob secures rack and sparetire to vehicle - Yakima signature bottle opener lets you enjoy a post-ride cold one - 2-bike capacity TECHNICAL SPECS - Weight: 21.50 lbs - Dimensions: L 40.00” x W 13.00” x H 19.00”
Page 1 of 6 Next page